Quick BASIC結構化程序設計

第一章  Quick BASIC的基本知識                  
                   
 1.1  Quick BASIC簡介                  
 1.1.1  計算機語言                  
 1.1.2  BASIC的發展                  
 1.1.3  Quick BASIC的特點                  
 1.2  Quick BASIC程序結構                  
 1.3  語言元素                  
 1.3.1  字符集                  
 1.3.2  標識符                  
 1.4  數據類型                  
 1.4.1  基本數據類型                  
 1.4.2  用戶自定義的數據類型                  
 1.5  常量與變量                  
 1.5.1  常量                  
 1.5.2  變量                  
 1.5.3  運算中數值精度的類型轉換                  
 1.6  運算符與表達式                  
 1.6.1  算術運算                  
 1.6.2  關系運算                  
 1.6.3  邏輯運算                  
 1.6.4  字符串運算                  
 1.6.5  表達式的混合運算規則                  
 1.7  內部函數                  
 習題                  
                   
 第二章  順序結構程序設計                  
                   
 2.1  數據的輸入                  
 2.1.1  鍵盤輸入語句                  
 2.1.2  讀數語句與置數語句                  
 2.1.3  恢復數據區的語句                  
 2.2  輸出                  
 2.2.1  屏幕顯示語句                  
 2.2.2  WRITE語句                  
 2.2.3  PRINT USING語句                  
 2.2.4  賦值語句                  
 2.2.5  注釋語句                  
 2.2.6  暫停語句                  
 2.2.7  結束語句                  
 2.2.8  交換語句                  
 2.2.9  光標定位語句                  
 2.2.10  BEEP語句                  
 2.2.11  SLEEP語句                  
 2.2.12  CLEAR語句                  
 2.2.13  COLOR語句                  
 2.2.14  VIEW PRINT語句                  
 2.2.15  清屏語句                  
 習題                  
                   
 第三章  字符串                  
                   
 3.1  字符串常量與變量                  
 3.1.1  字符串常量                  
 3.1.2  字符串變量                  
 3.3  給字符串變量賦值                  
 3.3.1  用賦值語句給字符串變量賦值                  
 3.3.2  用LINE INPUT語句給字符串變量賦值                  
 3.3.3  用INPUT語句給字符串變量賦值                  
 3.3.4  用READ/DATA語句給字符串變量賦值                  
 3.3  字符串的比較                  
 3.4  字符串的函數                  
 3.4.1  求字符串長度的函數LEN函數                  
 3.4.2  字符串與數值之間轉換的函數                  
 3.4.3  求子串的函數                  
 3.4.4  刪除字符串首尾空格的函數LTRIM$函數和RTRIM$函數                  
 3.4.5  查子串位置的函數INSTR函數                  
 3.4.6  大小寫字母間的轉換函數UCASE$函數和LCASE$函數                  
 3.4.7  ASCII碼與字符之間的轉換函數                  
 3.4.8  串生成函數                  
 3.4.9  日期和時間函數                  
 3.5  舉例                  
 習題                  
                   
 第四章  算法與流程圖                  
                   
 4.1  算法的概念                  
 4.1.1  程序設計步驟                  
 4.1.2  算法                  
 4.2  算法的表示                  
 4.2.1  傳統流程圖                  
 4.2.2  N-S結構化流程圖                  
 4.2.3  結構化程序設計                  
 習題                  
                   
 第五章  選擇結構程序設計                  
                   
 5.1  單行條件語句IF語句                  
 5.1.1  語句形式                  
 5.1.2  執行過程                  
 5.1.3  語句說明                  
 5.1.4  應用舉例                  
 5.1.5  單行條件語句的嵌套                  
 5.2  塊結構的條件語句塊IF結構                  
 5.2.1  塊結構IF語句的一般形式                  
 5.2.2  執行過程                  
 5.2.3  結構說明                  
 5.2.4  應用舉例                  
 5.2.5  塊IF的嵌套                  
 5.2.6  在塊IF結構中使用ELSEIF                  
 5.3  多分支選擇結構SELECT CASE                  
 5.3.1  SELECT CASE結構的一般格式                  
 5.3.2  執行過程                  
 5.3.3  SELECT CASE結構中的“檢測表達式”和“表達式”                  
 5.3.4  應用舉例                  
 5.3.5  在CASE子句中使用多個條件                  
 5.4  轉移控制語句                  
 5.4.1  無條件轉移語句GOTO語句                  
 5.4.2  多分支選擇結構轉移語句ON-GOTO語句                  
 習題                  
                   
 第六章  循環結構程序設計                  
                   
 6.1  條件循環                  
 6.2  FOR-NEXT循環                  
 6.3  WHILE-WEND循環                  
 6.4  DO-LOOP循環                  
 6.4.1  當型循環                  
 6.4.2  直到型循環                  
 6.5  退出循環                  
 6.6  多重循環                  
 6.7  舉例                  
 習題                  
                   
 第七章  數組                  
                   
 7.1  數組的概念與定義                  
 7.1.1  一維數組和數組元素                  
 7.1.2  二維數組和數組元素                  
 7.2  靜態數組與動態數組                  
 7.2.1  靜態數組與動態數組                  
 7.2.2  動態數組的重新定義                  
 7.3  實例                  
 習題                  
                   
 第八章  函數與過程                  
                   
 8.1  自定義函數                  
 8.1.1  單行自定義函數                  
 8.1.2  多行形式                  
 8.2  子程序                  
 8.2.1  轉子程序與返回語句                  
 8.3  過程的定義                  
 8.3.1  SUB過程的定義                  
 8.3.2  FUNCTION函數過程的定義                  
 8.4  過程的說明與調用                  
 8.4.1  過程的說明                  
 8.4.2  過程的調用                  
 8.5  參數傳遞                  
 8.6  過程的遞歸調用                  
 8.7  變量的生存期和作用域                  
 8.7.1  變量的作用域                  
 8.7.2  變量的生存期                  
 8.8  多模塊調用與程序的連接                  
 8.8.1  多模塊調用                  
 8.8.2  程序的連接                  
 習題                    
                   
 第九章  文件處理                  
                   
 9.1  文件的概念                  
 9.1.1  文件的概念和分類                  
 9.1.2  數據文件的結構                  
 9.2  順序文件                  
 9.2.1  順序文件的基本操作                  
 9.2.2  順序文件的輸出                  
 9.2.3  順序文件的輸入                  
 9.2.4  文件操作語句和函數                  
 9.2.5  順序文件的簡單維護                  
 9.3  隨機文件                  
 9.3.1  隨機文件的基本操作                  
 9.3.2  隨機文件的輸出                  
 9.3.3  隨機文件的輸入                  
 習題                  
                   
 第十章  圖形處理                  
                   
 10.1  屏幕坐標系統                  
 10.1.1  屏幕顯示模式                  
 10.1.2  屏幕坐標系統                  
 10.2  屏幕控制語句                  
 10.3  基本繪圖語句                  
 10.3.1  顏色的設置                  
 10.3.2  基本繪圖語句                  
 10.4  圖形著色                  
 10.5  圖形窗口                  
 10.6  實例                  
 習題                  
                   
 第十一章  庫管理                  
                   
 11.1  庫的概念與使用                  
 11.1.1  庫的概念                  
 11.1.2  庫的使用                  
 11.2  Quick BASIC環境下建庫                  
 11.2.1  建立一個新的Quick庫                  
 11.2.2  擴充原有的Quick庫                  
 習題                  
                   
 第十二章  Quick BASIC 4.5上機實驗指導                  
                   
 12.1  屏幕窗口                  
 12.1.1  窗口介紹                  
 12.1.2  屏幕窗口基本名詞及基本構成                  
 12.2  菜單操作                  
 12.2.1  FILE菜單                  
 12.2.2  EDIT菜單                  
 12.2.3  VIEW菜單                  
 12.2.4  SEARCH菜單                  
 12.2.5  RUN菜單                  
 12.2.6  DEBUG菜單                  
 12.2.7  CALL菜單                  
 12.2.8  OPTION菜單                  
 12.2.9  HELP菜單                  
                   
 第十三章  Quick BASIC上機實驗                  
                   
 實驗1  Quick BASIC上機操作入門練習                  
 實驗2  基本輸入輸出的練習                  
 實驗3  選擇結構程序設計                  
 實驗4  循環結構程序設計                  
 實驗5  數組的應用                  
 實驗6  字符串的應用                  
 實驗7  函數的應用                  
 實驗8  過程的應用                  
 實驗9  數據文件的應用                  
 實驗10  圖形的應用                  
 實驗11  庫的應用                  
 實驗12  綜合設計                  
                   
 附錄 1  Quick BASIC保留字                   
 附錄 2  Quick BASIC 4.5語句一覽表                  
 附錄 3  Quick BASIC 4.5函數一覽表                  
 附錄 4  程序運行錯誤的錯誤代碼及其含義                  
 附錄 5  字符與ASCII代碼對照表