GOGO人体美鮑销魂,91亚洲女同在线

內容簡介

　　本書詳細地闡述了一種流水線12bit，75MSamples／s的ADC試驗?zāi)Ｐ?。該轉換器在第1級4位粗轉換之后的余量放大中，以簡單的開環增益級代替精確的閉環運放，比傳統實現方法（相同類型的商用產品）節省功耗60％以上，同時也提高了速度。對于這種替代所產生的增益的線性與非線性誤差，本書在分析與建立誤差模型的基礎上，提出了基于統計學的可行的后臺數字校準技術。實踐證明，通過復雜的數字電路的算法可估算這些誤差并實時地對輸出進行校準。 .我國在集成ADC方面，無論是設計還是其實現離國際先進水平的差躡都較大，而關于ADC設計方面的圖書也鮮見出版。因此，本書的引進出版，對我國集成電路設計，特別是高速、高精度和低功耗ADC設計方面將具有重要意義。...

作者簡介

暫缺《數字輔助的流水線AD轉換器理論與實現（影印版）》作者簡介

圖書目錄

List of Figures
List of Tables
Acknowledgments
Preface
1. INTRODUCTION
1. Motivation
2. Overview
3. Chapter Organization
2. PERFORMANCE TRENDS
1. Introduction
2. Digital Performance Trends
3. ADC Performance Trends
3. SCALING ANALYSIS
1. Introduction
2. Basic Device Scaling from a Digital Perspective
3. Technology Metrics for Analog Circuits
4. Scaling Impact on Matching-Limited Circuits
5. Scaling Impact on Noise-Limited Circuits
4. IMPROVING ANALOG CIRCUIT EFFICIENCY
1. Introduction
2. Analog Circuit Challenges
3. The Cost of Feedback
4. Two-Stage Feedback Amplifier vs. Open-Loop Gain Stage
5. Discussion
5. OPEN-LOOP PIPELINED ADCS
1. A Brief Review of Pipelined ADCs
2. Conventional Stage Implementation
3. Open-Loop Pipeline Stages
4. Alternative Transconductor Implementations
6. DIGITAL NONLINEARITY CORRECTION
1. Overview
2. Error Model and Digital Correction
3. Alternative Error Models
7. STATISTICS-BASED PARAMETER ESTIMATION
1. Introduction
2. Modulation Approach
3. Required Sub-ADC and Sub-DAC Redundancy
4. Parameter Estimation Based on Residue Differences
5. Statistics Based Difference Estimation
6. Complete Estimation Block
7. Simulation Example
8. Discussion
8. PROTOTYPE IMPLEMENTATION
1. ADC Architecture
2. Stage 1
3. Stage 2
4. Post-Processor
9. EXPERIMENTAL RESULTS
1. Layout and Packaging
2. Test Setup
3. Measured Results
4. Post-Processor Complexity
10. CONCLUSION
1. Summary
2. Suggestions for Future Work
Appendices
A- Open-Loop Charge Redistribution
B- Estimator Variance
C- LMS Loop Analysis
1. Time Constant
2. Output Variance
3. Maximum Gain Parameters
References
Index